Stoves
Pellet Stove Cleaning & Repair
A pellet stove is a convenient, efficient heater, but it has more moving parts than a wood stove, augers, fans, igniters, and controls, and it needs regular cleaning to run well. When one stops feeding, will not ignite, or burns poorly, the fix is usually cleaning, a worn component, or both.
Why pellet stoves need regular cleaning
Pellet stoves burn compressed fuel and produce fine ash and, over time, buildup in the burn pot, heat exchanger, hopper, auger path, and venting. As that accumulates, the stove loses efficiency, feeds unevenly, or shuts down on its own. Regular cleaning of these areas is what keeps a pellet stove reliable, more so than with a simple wood stove.
Many mid-winter breakdowns are really a stove that was overdue for a thorough cleaning.
Common repairs
Because a pellet stove is a mechanical appliance, typical repairs involve the auger and feed system, the combustion and convection fans, the igniter, and the control board and sensors. Symptoms like no feed, no ignition, frequent shutdowns, or weak heat point to specific components. We diagnose the fault and repair or replace the part rather than treating the symptom.
We service the stove and its venting together, since a blocked or poorly configured vent causes operating problems that look like stove faults.
Keeping it running
A pellet stove does best with periodic cleaning and a seasonal check of its moving parts and venting. Using quality pellets and keeping the burn pot and exchanger clean go a long way. When something does fail, catching it early usually means a component repair rather than a cold house in January.
Signs a pellet stove needs service
- It won't feed pellets
- It won't ignite
- Frequent unexpected shutdowns
- Weak or inconsistent heat
- Excess ash or buildup
- Unusual noise from the fans or auger
Pellet stove service includes
- Cleaning the burn pot, exchanger, and hopper
- Clearing the auger path and venting
- Checking the combustion and convection fans
- Testing the igniter and sensors
- Servicing the control board where needed
- Confirming the venting is clear and intact
Serving St. Louis & Kansas City
We provide pellet stove cleaning & repair across both of our home regions — the St. Louis metro, including the Metro East communities in Illinois, and the Kansas City metro on both the Missouri and Kansas sides — generally within about 65 miles of each city. Wherever you are, the approach is the same: we look at the actual system on site, explain what we find in plain terms, and lay out the options before any work begins. We use cautious, honest language about what we can and can't determine, and we don't quote a price or promise a fix for a problem we haven't assessed in person. Each metro has its own direct phone number, so you always reach the right place, and we're available around the clock to take your call and get you on the schedule.
A stove project depends on the unit, the room and intended location, required clearances and hearth protection, the venting route, and local permit and code requirements — determined for the property rather than assumed.
Keeping ahead of it
A stove rewards good habits: seasoned fuel, hot clean fires rather than long smoldering ones, and a yearly inspection and cleaning of the venting. Even an efficient stove produces buildup, so the flue needs regular attention to keep drawing well and burning safely through the heating season.
Questions
Pellet Stove Cleaning & Repair FAQs
How often should a pellet stove be cleaned?
Pellet stoves need frequent cleaning of the burn pot and ash, plus periodic thorough cleaning of the exchanger, hopper, auger path, and venting. Usage and pellet quality set the pace.
My pellet stove keeps shutting off. Why?
Frequent shutdowns often trace to buildup, a dirty burn pot or exchanger, a fan or sensor fault, or a venting issue. Diagnosis identifies which so it is corrected properly.
Do pellet stoves need their venting checked?
Yes. The venting still needs to be clear and intact for the stove to run correctly, and a blocked vent causes faults that can look like stove problems.
Do you service both St. Louis and Kansas City?
Yes. This is one of the services we provide across both the St. Louis and Kansas City metro areas, each with its own direct phone number. Call the number for your area and we'll take it from there.
St. Louis metro
Pellet Stove Cleaning & Repair near St. Louis
Available across the St. Louis service area, including:
Kansas City metro
Pellet Stove Cleaning & Repair near Kansas City
Available across the Kansas City service area, including:
24/7 service
Need pellet stove cleaning & repair? Let’s talk.
Choose your area and we’ll take it from there. Available 24/7.
Get in touch
Request pellet stove cleaning & repair
Tell us about your chimney or fireplace and the best number to reach you. Full name, phone, and ZIP are required.
- Available 24/7 to take your call and schedule a visit.
- We assess the system on site and explain options before any work.
- Serving the St. Louis and Kansas City metro areas.